Skip to content

Search a model in scale


Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement

Visitors - Hits

We have 36 guests online

Statistics

18,951,121Visitors:
4,171Visitors today:
3,573Visitors yesterday:
 
2008-05-01Statistics started:
 
Home
1/48 Revell SH-60B SEAHAWK HSL-49 SCORPIONS by Alexandros Marinos
Votes: 4
Vote this  

sh60 marinos

Alexandros Marinos contributes his marvelous Revell SeaHawk to our gallery! Scratch built details, beautifull painting and  immpressive tail rotor markings, make this bird a real eye catcher (Comments by Thomas Sandros)

1/48 Revell SH-60B SEAHAWK HSL-49 SCORPIONS

by Alexandros Marinos 

sh60 marinos

LINE RED

  HISTORY

The Sikorsky SH-60/MH-60 Seahawk (or Sea Hawk) is a twin turboshaft engine, multi-mission United States Navy helicopter based on the United States Army UH-60 Black Hawk and a member of the Sikorsky S-70 family. The most significant airframe modification is a hinged tail to reduce its footprint aboard ships.

The U.S. Navy uses the H-60 airframe under the model designations SH-60B, SH-60F, HH-60H, MH-60R, and MH-60S. Able to deploy aboard any air-capable frigatedestroyercruiserfast combat support ship,amphibious assault ship, or aircraft carrier, the Seahawk can handle anti-submarine warfare (ASW), anti-surface warfare (ASUW), naval special warfare (NSW) insertion, search and rescue (SAR), combat search and rescue (CSAR), vertical replenishment (VERTREP), and medical evacuation (MEDEVAC). All Navy H-60s carry a rescue hoist for SAR/CSAR missions.

SH-60B_Seahawk_helicopter_HSL-49_Tailbird_Point_Loma_San_Diego_2006

In early 1978 the Navy selected Sikorsky's S-70B design, which was designated "SH-60B Seahawk". The SH-60B entered operational service in 1984 with first operational deployment in 1985. It carries a complex system of sensors including a towed Magnetic Anomaly Detector (MAD) and air-launched sonobuoys. Other sensors include the APS-124 search radar, ALQ-142 ESM system and optional nose-mounted forward looking infrared (FLIR) turret. Munitions carried include the Mk 46Mk 50, or Mk 54 torpedoAGM-114 Hellfire missile, and a single cabin-door-mounted M60D/M240 7.62 mm (0.30 in) machine gun or GAU-16 .50 in (12.7 mm) machine gun.

A standard crew for a SH-60B is one pilot, one ATO/Co-Pilot (Airborne Tactical Officer), and an enlisted aviation warfare systems operator (sensor operator). Operating squadrons are designated Helicopter Anti-Submarine Squadron, Light (HSL).

(source: http://en.wikipedia.org/wiki/Main_Page)

KIT

105849-b

As a co-pilot at this type of Helo in the Hellenic Navy, I had bought this kit a long time ago and just remained at my stock waiting the proper time to open it. Revell’s kit is actually Italeri’s kit from 2003 but with new decals (HSL-49 Sqdr). The surfaces have restrained recessed panel lines with raised rivets except the under surfaces (I cannot understand the reason) where the panel lines are raised. The kit also lacks obvious interior details but don’t worry Eduard has released detail interior/exterior sets. Personally, I decided to build this kit out of the box adding basic improvements myself. 

CONSTRUCTION

  To be honest, this kit proved to be a real troublemaker generally due to bad fitting problems. The first improvement was to rescribe the under surface panel lines. Then I improved a little bit  the interior by adding  seatbelts from Tamiya tape and improving the cabin seats/consoles using sheets of plastic. As for the exterior, improvements were made to:

  • Main landing gear system, where I added navy buckles at the wheels, hydraulic lines using thin metal wire and also shortened the struts because they were too long for a helicopter in ground.
  • Tail landing gear system, where I also added hydraulic line and also changed the wheels (I used a pair from an old Sea King) because they were too large for the scale.
  • Nose section, where I added the missile warning system using Milliput white putty and also made drills for the windshield wipers.
  • Vertical stabilator, where I improved  the anti-collision light (speaking for this I added a lower anti-collision light at the bottom of the cabin as it wasn’t included) and added also the ‘rear’ missile warning system.
  • Main and tail rotor heads where I added the de-ice wiring

20151130_204936 20151130_204949 20151130_205041 20151203_133935  20160105_220623 20160105_220659 20160225_223101 20160225_223206

Humbrol putty was used almost for the entire exterior parts (specifically at weapon pylons-main landing system) and then sanded carefully in order not to lose the raised rivets.

Another big problem of the kit was the clear parts of the nose section. The windshield was a bit smaller so didn’t fit very well and the pilot’s/co-pilot’s windows were too big for the doors so I fixed them by sanding the big ones and for the windshield by using small parts of plastic sheet and microsol’s crystal clear. Just to mention that all clear parts were first dived into Future.

I considered the torpedoes (Mk 46) of the kit not appropriate because of the lack of propulsion system so I changed them with a pair of Mk 50 (from my spare box) with better detail.

The HF antenna along the tail section was made by myself -as Revell didn’t include it at all-by using EZ line and small pieces of plastic.

Painting-Decals
 Before getting started, the kit was first primed with Mr Surfacer 1000 grey (of course after masking the windshield and the cabin windows) and then I pre-shaded the kit using flat black and buff .
I used Gunze acrylics for the entire camo except the tail pylon.

So, side surfaces were painted with H308 (FS 36375), upper surfaces with H307 (FS 36320) and under surfaces with H338 (FS 36495). For the tail, I used AKAN’s acrylic red (73058) because it’s brighter than Gunze H3 but first I applied a coat of flat white. The cockpit was painted with tire black (H77) and the cabin with H317 and H307 for the cabin floor. Wash for the interior was made with Dark Dirt (Flory models). As for the rotor blades, I used H307 and weathered them with different grey colours (H334 & H338). The leading edges were masked and painted with sandy yellow, the fin tips were sprayed with a mixture of RLM66 and one drop of flat black and the main rotor axis was painted with Alclad aluminium. Torpedoes were sprayed with Alclad aluminium, pale burnt metal, orange (Hu 18) and flat black.

For the weathering process I used the same technique with the rotor blades spraying sporadically different grey colours (H308+H334+H338). Then I applied a coat of gloss varnish in order to put the decals. Fortunately, I didn’t have any problems with them and also behaved very well with Mr Mark Softer. Just pay attention with the Scorpion decal because of his large size.

Finishing-Conclusion
After the decals, I applied again a coat of gloss varnish in order to prepare the surface for some wash and apply oil colours for a realistic effect. Revell doesn’t provide any internal engine fans so I decided to make FOD covers for the engines and APU exhaust using Milliput white.

For the wash I used Van Gogh’s Paynes Grey and for making leaks and dirt I used different shades of Naples Yellow and Raw Umber. For the tail pylon I also used Tamiya smoke to achieve the dirt from the engine exhausts. A coat of Mig’s satin varnish sealed everything in, and adding the HF antenna, main rotor blades in fold position (Revell gives this opportunity) and RBF which were printed by me at a high quality gloss paper, completed the model.

Despite the fitting problems, adding a few do-it-yourself details and with a large amount of patience, Revell’s kit comes to life and gives a very nice Navy Helicopter.

  ADDITIONAL

DSC_0114

LINE RED

DSC_0100 DSC_0103 DSC_0105 DSC_0106DSC_0111 DSC_0118 DSC_0119 DSC_0120DSC_0122 DSC_0123 DSC_0124 DSC_0126

LINE RED

DSC_0107

CONCLUSSION

I hope you like it!!!

-------------------------------------------------------------------------------------------------------------------------------

Text and Photos by Alexandros MarinosLINE RED

 


 

 

Last Updated ( Πέμπτη, 02 Ιούνιος 2016 )